clock-iconOpening Hours: Monday - Friday (08.00 - 18.00)

page-banner

JVL-90 Ultrasonic Cleaning Machine with Gold Dust Recovery for Jewelry Manufacturing

  • JVL-90 ultrasonic jewelry cleaning machine with gold dust recovery – Machem
  • JVL-90 ultrasonic jewelry cleaning machine with gold dust recovery – Machem
  • JVL-90 ultrasonic jewelry cleaning machine with gold dust recovery – Machem
  • JVL-90 ultrasonic jewelry cleaning machine with gold dust recovery – Machem
  • JVL-90 ultrasonic jewelry cleaning machine with gold dust recovery – Machem

JVL-90 Ultrasonic Cleaning Machine with Gold Dust Recovery for Jewelry Manufacturing

JVL Series

JVL-90 ultrasonic cleaning machine for jewelry manufacturing with gold dust recovery: more gold recovered, longer bath life, 3–5× faster cleaning. Contact us.

Contact us for more information about JVL-90 Ultrasonic Cleaning Machine with Gold Dust Recovery for Jewelry Manufacturing.

Description

JVL-90: Ultrasonic Cleaning with Gold Dust Recovery in Jewelry Manufacturing

The Machem JVL-90 is an ultrasonic cleaning machine developed for precision part cleaning, above all in jewelry and goldsmith manufacturing workshops. While removing polishing compound, rouge and dirt left after polishing, it also recovers the major part of the gold dust that passes into the chemical cleaning solution. It raises cleaning quality and returns precious metal that would otherwise be lost with every wash.

Gold Dust Retention System

Gold dust and polishing compound from the polishing stage pass into the bath during cleaning. The special gold dust retention system of the JVL-90 collects these particles in a separate zone and largely prevents them from escaping to the drain or the waste bath.

  • More gold dust recovered: Less gold is discarded with the bath, so more gold is recovered.
  • Very fast return on investment: The value of the recovered gold lets the machine pay for itself in a short time.
  • Settled residues do not mix back in: Heavy residues such as polishing compound collect at the bottom. When the machine restarts, they do not mix back into the chemical solution or redeposit on cleaned parts.
  • Longer chemical bath life: Because residues do not circulate freely, the chemistry stays effective longer; bath change frequency and chemical consumption go down.

Standard Oscillation System

The JVL-90 comes with an oscillation system as standard. The oscillating motion keeps the parts constantly changing position within the ultrasonic field, so cleaning is uniform on all surfaces and dirt and compound in stone settings and recesses are removed faster.

3–5 Times Faster and More Effective Cleaning

The oscillation effect works together with the transducer layout designed specifically for the JVL-90. Cavitation therefore reaches hard-to-access areas such as stone settings, chain links and filigree work uniformly, giving 3–5 times faster and more effective cleaning than conventional ultrasonic systems.

Heater Replacement in 5 Minutes Without Draining the Bath

Thanks to the special heater design, a heater failure does not require draining the bath. The heater can be replaced in about 5 minutes; production keeps running, and neither the chemistry nor the gold dust in it is lost.

Control Options

The JVL-90 is available with PLC control or without PLC control. On the PLC-controlled version, cleaning time, temperature, ultrasonic operating parameters, oscillation and the gold dust retention system can be programmed, so the same cleaning result is repeated for every production batch. The version without PLC is ideal for workshops that want simple operation and a more economical investment.

What It Brings to Your Business

  • Higher quality: Thoroughly cleaned surfaces give better results in subsequent plating and finishing.
  • Fewer quality returns: Customer returns caused by compound residue and stains decrease.
  • Higher output with fewer machines: Short cycle times let you do the same work with fewer machines and fewer operators.
  • Low operating cost: Less chemistry, less frequent bath changes and short maintenance stops.

Applications

  • Jewelry and goldsmithing: Gold, silver and platinum jewelry, diamond and hard-stone pieces, casting trees, chain and accessory production, intermediate and final cleaning after polishing.
  • Medical sector: Precision cleaning of surgical instruments, implants and medical equipment parts.
  • Defense industry: Cleaning of weapon parts, barrels and precision mechanical components.
  • Automotive industry: Cleaning of injectors, fuel system parts and tight-tolerance engine components.

In jewelry, porous or soft stones such as emerald, opal, pearl and turquoise are not suitable for ultrasonic cleaning.

Frequently Asked Questions

How does the JVL-90 collect gold dust?
The gold dust retention system collects gold dust and heavy residues that pass into the bath in a separate zone. These particles can be removed periodically and sent to a refinery.

Does the bath have to be drained if a heater fails?
No. The heater can be replaced in about 5 minutes without draining the bath.

How does it differ from a conventional ultrasonic machine?
Thanks to the oscillation effect and special transducer layout it cleans 3–5 times faster, and it also offers gold dust recovery and longer bath life.

What is the difference between the PLC-controlled version and the version without PLC?
On the PLC-controlled version, time, temperature, ultrasonic parameters, oscillation and the gold dust retention system are programmed for repeatable cleaning. The version without PLC offers simple operation and a more economical investment.

Which chemistry does it work with?
An ultrasonic cleaning chemical suited to polishing compound is recommended. See our guide How to Choose an Ultrasonic Cleaning Chemical for details.

Related Guides

To find out how much gold dust your workshop could recover with the JVL-90, contact us.

Tags: JVL-90 Ultrasonic Cleaning Machine, Machem

mac-icon İlginizi Çekebilecek Diğer Ürünlerimiz