How to Choose an Ultrasonic Cleaning Machine
Choosing the right ultrasonic cleaning machine depends on your parts, your soils and your throughput. Here are the key factors to consider.
1. Tank Size and Capacity
The tank must comfortably fit your largest part and typical batch, with room for a basket. Oversizing wastes energy and chemistry; undersizing limits throughput.
2. Frequency
Lower frequencies (20-25 kHz) clean robust parts and heavy soils powerfully; higher frequencies (40 kHz+) are gentler, ideal for delicate or finely detailed parts. Some applications benefit from multi-frequency or oscillation systems.
3. Ultrasonic Power
Power (watts per litre) must match tank volume and soil load for effective cavitation across the whole bath.
4. Heating and Chemistry
A heated tank and the right detergent dramatically improve results. Match the chemistry to your material and contamination.
5. Rinsing and Drying
For spot-free parts, plan for rinsing (ideally pure/DI water) and drying (hot-air or vacuum). Blind holes especially benefit from vacuum drying.
6. Automation and Throughput
Manual, semi-automatic or fully automated multi-stage lines - choose based on volume, labour and consistency needs.
MACHEM Guidance
MACHEM helps you specify the right machine, from single-tank systems to multi-stage automated lines with vacuum drying. Contact us with your parts and soils for a tailored recommendation.
Language
Türkçe
English
Deutsch
Русский
Français
عربي