clock-iconOpening Hours: Monday - Friday (08.00 - 18.00)

Ultrasonic Cleaning of Wire Drawing Dies

Wire drawing dies are precision tools that reduce copper, steel and aluminium wire to the required diameter and surface. Even the smallest deposit in the die's conical hole shows up directly in the wire's diameter, its surface and production continuity.

During drawing, an unavoidable contamination builds up in the conical hole of the carbide (tungsten carbide) or diamond/polycrystalline-diamond die: drawing-oil and soap residue, loose metal dust (copper dust), copper oxide and other oxides, and carbon deposits. When this layer narrows the entry cone and the bearing region, the die geometry is spoiled. The result is wire-diameter deviation, marks and scratches on the surface, accelerated die wear and more downtime from breaks.

What makes cleaning difficult?

The working region of a drawing die is narrow, deep and conical; the entry cone, the drawing angle and the bearing region are polished, delicate surfaces. This geometry creates three distinct difficulties:

  • Stubborn deposit: Hardened soap, metal dust and the oxide layer adhere firmly to the hole surface; merely soaking in solvent is often not enough.
  • Risk to the delicate surface: Mechanical cleaning with wire, needle or brush can scratch the polished conical hole and permanently ruin the die.
  • Unreachable depth: A static ultrasonic bath cleans the mouth of the hole but cannot reach deep into the narrow conical hole. The trapped air pocket inside blocks cavitation, the dissolved dirt cannot be expelled, and it soon settles again.

How does the MCH Rosd 170 solve this?

Thanks to its special mechanical design and its special movement capability within the ultrasonic bath, the MCH Rosd 170 adds a sweeping action to the ultrasonic effect; together with the right chemical, this action works all the way into the conical hole of the drawing die:

  • Air evacuation: The special mechanical design continuously changes the die's position within the bath; the trapped air escapes, bath liquid takes its place and the ultrasonic effect reaches the very bottom of the hole.
  • Forced flow and pumping: The special movement capability continuously pushes and pulls the chemical along the hole; the dissolved soap, metal dust and oxide are carried out, and fresh bath replaces the contaminated liquid.

Dual frequency is decisive here: the low frequency 27 kHz strips heavy soap, copper dust and oxide deposits with powerful cavitation, while the high frequency 40 kHz provides gentle but effective cleaning on the polished conical hole surface. PLC control enables a separate program and process optimisation for different die types; thanks to the 7 different baskets, parts of different geometries can be cleaned in the same bath. An oil-separation channel keeps the bath efficient for longer.

Relevant MCH Rosd 170 features

  • Sweeping effect into the conical hole through its special movement capability (standard)
  • 27 / 40 kHz dual-frequency ultrasonic setting
  • PLC control — different program and process optimisation
  • Cleaning of parts of different geometries in the same bath with 7 different baskets
  • Custom manufacturing in the required size and capacity

Through the sweeping effect created by its special mechanical design and special movement capability within the ultrasonic bath, the conical hole of the die is cleaned with great precision; the die geometry is preserved, its life is extended and the diameter and surface quality of the drawn wire become consistent. At the end of washing, the sweeping process is still active as the dies leave the bath; thanks to position control they come out clean carrying a minimum of dirt. Break-related downtime therefore falls, and production and quality increase directly.

Sectors: Copper wire and cable · Steel and alloy wire · Aluminium wire · Enamelled / magnet wire · Fastener and welding wire

Machem + Molkim — Turn-key solution: The MCH Rosd 170 is part of a turn-key solution jointly developed by Machem and Molkim: machine and chemical are designed together, end to end, as a complete process and offered from a single source as a definitive solution. The entire process is controlled by PLC; thanks to its special mechanical design and special movement capability within the ultrasonic bath, the holes are cleaned with great precision, which directly enables increases in production and quality.

If you would like to evaluate the MCH Rosd 170 solution for your wire drawing dies, get in touch with us.